solar pool panels in Citrus County FL is The Choice for Heating Your Pool
in Citrus County FL
panels in Citrus County FL are constructed with at least 30% more raw materials than
any other manufacturers panels.
panels in Citrus County FL
are hand tooled to provide a durable construction for a
fully wetted surface that maximizes the panel performance. The
104 elliptical flow channels are the Only ones in the industry
to protect against freeze. The flat plate monolithic
construction makes it the best suited solar panel for use in
tough applications (such as tile roofs).
manufacturing is in St Petersburg, Florida to provide you with
unsurpassed service. Having its factory in Florida, Nuvis
offers its Authorized Dealers with custom sized panels for
panels have been manufactured since 1976. We offer Replacement
Warranties up to 20 years and having a Florida Factory ensures
the warranty will be exercised right here in Florida. We offer
only Full Replacement Warranties, up to 20 years with absolutely
no plugs or patches. The panels come with a 10 year warranty.
You will be given the opportunity, at the end of your original
10 year warranty, to purchase an additional 10 year option.
panel has been imitated over and over again, but our quality has
never been duplicated. Our system has a patented design which
will reliably heat your pool to a comfortable swimming
temperature without increasing your utility bills.
Other panels in
Citrus County FL can
cool rapidly during windy conditions because the individual flow
tubes aren�t insulated by each other.
tubes are connected for insulation so that they stay warm
longer. This patented design also allows our panels to withstand
freezing conditions better than collectors with round flow tubes
that cannot expand or change shape.
collectors in Citrus County FL contain 35% more polypropylene and UV stabilizers
than any other panel. This means that our panels have a much
longer life expectancy than the competition. In fact, our panels
are so well built that they can withstand the strength of a 150
Once our panels are installed,
there is no additional maintenance or cost involved. You just
sit back and relax in your refreshingly warm swimming pool. For
added peace of mind, we back all of our systems up with the
longest and most comprehensive warranty in the industry.
Description - The absorber is
made from 4 extruded UV polymer strips heat sealed
longitudinally to form one UV polymer panel which is bonded
to the headers. This UV polymer sheet contains 104 channels
per 47.5 inch width. Each channel is either 7'6 or 9'7 or
12' long depending on panel requirements.
Composition - Polypropylene,
polyethylene, black surface copolymer compound with a
proprietary ultraviolet stabilizer.
Treatment - Continuous
extrusion process with vacuum forming.
Channel Wall thickness: 0.039
Spacing - 104 channels per
47.5 inch absorber width. Absorber thickness: 0,220 inch.
Performance - Absorptivity of
Solar Radiation 95%. Emissivity of Infrared Radiation 92%.
Integrity - Absorbers are
individually pressure tested at 55 PSI. Absorbers have been
tested at 110 PSI without any damage.
Chemical resistance: The
absorber is NOT affected by normal aqueous solutions or by
chemicals normally found in swimming pools, spas or hot
Degradation - DEST
Laboratories in Arizona has conducted prolonged outdoor
testing with over 1,000,000 Langleys of U.V. exposure
(approximately 5 years exposure) the result of which shows
less than 1% degradation
Degradation - Absorbers have
been subjected to prolonged stagnation in many climates with
NO Thermal degradation visible.
degradation - Absorbers have
been subjected to 30 freezing cycles. No apparent damage to
absorber or header. Moisture, snow and ice do not affect the
Weathering - No surface
damage is visible after 5 plus years of operation.
Assembly - General
description: The absorber sheet is thermally bonded to the
extruded headers. Grooves in the header allow for leak tight
bonds with the rubber expansion couplers used to join
collectors to the piping.
General Method of Operation:
absorbers are designed to operate either in the drain-back
or closed loop systems. Most automatic control valves are
compatible with the solar collectors.